Millermatic DVI (Dual Voltage Input) is the first Millermatic that easily plugs into either 115 or 230 Volt power.

• MIG (GMAW)
• Flux Cored (FCAW)
• 10 ft (3 m), M-10 MIG gun
• 10 ft (3 m) work cable with clamp
• Argon mix regulator/flow gauge with hose
• Factory-installed running gear/cylinder rack
• .030/.035 in (0.8/0.9 mm) reversible dual groove drive rolls

Six taps provide welding range of 30 - 175 Amps with superior performance throughout its operating range. Welds materials from 22 gauge up to 3/8 in on 230 V power, and 22 gauge up to 3/16 in on 115 V power.